The Ins and Outs of WebMatrix: .NET Programming Using the Razor Syntax

This tutorial gives you an overview of programming with ASP.NET Web Pages using the Razor syntax. ASP.NET is Microsoft’s technology for running dynamic web pages on web servers.

---

What You’ll Learn:

• The top 8 programming tips for getting started with programming ASP.NET Web Pages using Razor syntax.
• Basic programming concepts you’ll need for this session.
• What ASP.NET server code and the Razor syntax is all about.

---

The Top 8 Programming Tips

This section lists a few tips that you absolutely need to know as you start writing ASP.NET server code using the Razor syntax.
Note: The Razor syntax is based on the C# programming language, and that’s the language used throughout this session. However, the Razor syntax also supports the Visual Basic language, and everything you see in this session you can also do in Visual Basic.

1. You add code to a page using the @ character.

The @ character starts inline expressions, single statement blocks, and multi-statement blocks:

!-- Single statement blocks  --
@{ var total = 7; }
@{ var myMessage = "Hello World"; }

!-- Inline expressions --
pThe value of your account is: @total /p
pThe value of myMessage is: @myMessage/p

!-- Multi-statement block --
@{
    var greeting = "Welcome to our site!";
    var weekDay = DateTime.Now.DayOfWeek;
    var greetingMessage = greeting + " Today is: " + weekDay;
}
pThe greeting is: @greetingMessage/p

This is what these statements look like when the page runs in a browser:

HTML Encoding

When you display content in a page using the @ character, as in the preceding examples, ASP.NET HTML-encodes the output. This replaces reserved HTML characters (such as and and ) with codes that enable the characters to be displayed as characters in a web page instead of being interpreted as HTML tags or entities. Without HTML encoding, the output from your server code might not display correctly, and could expose a page to security risks.
If your goal is to output HTML markup that renders tags as markup (for example p/p for a paragraph or em/em to emphasize text), see the section Combining Text, Markup, and Code in Code Blocks later in this article.

2. You enclose code blocks in braces.

A code block includes one or more code statements and is enclosed in braces.

!-- Single statement block.  --
@{ var theMonth = DateTime.Now.Month; }
pThe numeric value of the current month: @theMonth/p

!-- Multi-statement block. --
@{
    var outsideTemp = 79;
    var weatherMessage = "Hello, it is " + outsideTemp + " degrees.";
}
pToday's weather: @weatherMessage/p

The result displayed in a browser:

3. Inside a block, you end each code statement with a semicolon.

Inside a code block, each complete code statement must end with a semicolon. Inline expressions don’t end with a semicolon.

!-- Single-statement block --
@{ var theMonth = DateTime.Now.Month; }

!-- Multi-statement block --
@{
    var outsideTemp = 79;
    var weatherMessage = "Hello, it is " + outsideTemp + " degrees.";
}

!-- Inline expression, so no semicolon --
pToday's weather: @weatherMessage/p

4. You use variables to store values.

You can store values in a variable, including strings, numbers, and dates, etc. You create a new variable using the var keyword. You can insert variable values directly in a page using @.

!-- Storing a string --
@{ var welcomeMessage = "Welcome, new members!"; }
p@welcomeMessage/p

!-- Storing a date --
@{ var year = DateTime.Now.Year; }

!-- Displaying a variable --
pWelcome to our new members who joined in @year!/p

The result displayed in a browser:

5. You enclose literal string values in double quotation marks.

A string is a sequence of characters that are treated as text. To specify a string, you enclose it in double quotation marks:

@{ var myString = "This is a string literal"; }

If the string that you want to display contains a backslash character () or double quotation marks, use a verbatim string literal that’s prefixed with the @ operator. (In C#, the character has special meaning unless you use a verbatim string literal.)

!-- Embedding a backslash in a string --
@{ var myFilePath = @"C:MyFolder"; }
pThe path is: @myFilePath/p

To embed double quotation marks, use a verbatim string literal and repeat the quotation marks:

!-- Embedding double quotation marks in a string --
@{ var myQuote = @"The person said: ""Hello, today is Monday."""; }
p@myQuote/p

The result displayed in a browser:

Note:  The @ character is used both to mark verbatim string literals in C# and to mark code in ASP.NET pages.

6. Code is case sensitive.

In C#, keywords (like var, true, and if) and variable names are case sensitive. The following lines of code create two different variables, lastName and LastName.

@{
    var lastName = "Smith";
    var LastName = "Jones";
}

If you declare a variable as var lastName = "Smith"; and if you try to reference that variable in your page as @LastName, an error results because LastName won’t be recognized.
Note: In Visual Basic, keywords and variables are not case sensitive.

7. Much of your coding involves objects.

An object represents a thing that you can program with — a page, a text box, a file, an image, a web request, an email message, a customer record (database row), etc. Objects have properties that describe their characteristics — a text box object has a Text property (among others), a request object has a Url property, an email message has a From property, and a customer object has a FirstName property. Objects also have methods that are the “verbs” they can perform. Examples include a file object’s Save method, an image object’s Rotate method, and an email object’s Send method.
You’ll often work with the Request object, which gives you information like the values of form fields on the page (text boxes, etc.), what type of browser made the request, the URL of the page, the user identity, etc. This example shows how to access properties of the Request object and how to call the MapPath method of the Request object, which gives you the absolute path of the page on the server:

table border="1"
tr
    tdRequested URL/td
    tdRelative Path/td
    tdFull Path/td
    tdHTTP Request Type/td
/tr
tr
    td@Request.Url/td
    td@Request.FilePath/td
    td@Request.MapPath(Request.FilePath)/td
    td@Request.RequestType/td
/tr
/table

The result displayed in a browser:

8. You can write code that makes decisions.

A key feature of dynamic web pages is that you can determine what to do based on conditions. The most common way to do this is with the if statement (and optional else statement).

@{
   var result = "";
   if(IsPost)
   {
      result = "This page was posted using the Submit button.";
   }
   else
   {
      result = "This was the first request for this page.";
   }
}

!DOCTYPE html
html
    head
        title/title
    /head
body
form method="POST" action=""
  input type="Submit" name="Submit" value="Submit"/
  p@result/p
/form
/body
/html
    /body
/html

The statement if(IsPost) is a shorthand way of writing if(IsPost == true). Along with if statements, there are a variety of ways to test conditions, repeat blocks of code, and so on, which are described later in this tutorial.
The result displayed in a browser (after clicking Submit):

---

HTTP GET and POST Methods and the IsPost Property

The protocol used for web pages (HTTP) supports a very limited number of methods (verbs) that are used to make requests to the server. The two most common ones are GET, which is used to read a page, and POST, which is used to submit a page. In general, the first time a user requests a page, the page is requested using GET. If the user fills in a form and then clicks Submit, the browser makes a POST request to the server.
In web programming, it’s often useful to know whether a page is being requested as a GET or as a POST so that you know how to process the page.

In ASP.NET Web Pages, you can use the IsPost property to see whether a request is a GET or a POST.

If the request is a POST, the IsPost property will return true, and you can do things like read the values of text boxes on a form. Many examples in this session show you how to process the page differently depending on the value of IsPost.

---

A Simple Code Example

This procedure shows you how to create a page that illustrates basic programming techniques. In the example, you create a page that lets users enter two numbers, then it adds them and displays the result.

1. In your editor, create a new file and name it AddNumbers.cshtml.
2. Copy the following code and markup into the page, replacing anything already in the page.

   @{
       var total = 0;
       var totalMessage = "";
       if(IsPost) {
   
           // Retrieve the numbers that the user entered.
           var num1 = Request["text1"];
           var num2 = Request["text2"];
   
           // Convert the entered strings into integers numbers and add.
           total = num1.AsInt() + num2.AsInt();
           totalMessage = "Total = " + total;
       }
   }
   
   !DOCTYPE html
   html lang="en"
     head
       titleAdd Numbers/title
       meta charset="utf-8" /
       style type="text/css"
         body {background-color: beige; font-family: Verdana, Arial;
               margin: 50px; }
         form {padding: 10px; border-style: solid; width: 250px;}
       /style
     /head
   body
     pEnter two whole numbers and then click strongAdd/strong./p
     form action="" method="post"
       plabel for="text1"First Number:/label
         input type="text" name="text1" /
       /p
       plabel for="text2"Second Number:/label
         input type="text" name="text2" /
       /p
       pinput type="submit" value="Add" //p
     /form
   
     p@totalMessage/p
   
   /body
   /html
   

   Here are some things for you to note:
   
   • The @ character starts the first block of code in the page, and it precedes the totalMessage variable that’s embedded near the bottom of the page.
     
   • The block at the top of the page is enclosed in braces.
     
   • In the block at the top, all lines end with a semicolon.
     
   • The variables total, num1, num2, and totalMessage store several numbers and a string.
     
   • The literal string value assigned to the totalMessage variable is in double quotation marks.
     
   • Because the code is case-sensitive, when the totalMessage variable is used near the bottom of the page, its name must match the variable at the top exactly.
     
   • The expression num1.AsInt() + num2.AsInt() shows how to work with objects and methods. The AsInt method on each variable converts the string entered by a user to a number (an integer) so that you can perform arithmetic on it.
     
   • The form tag includes a method="post" attribute. This specifies that when the user clicks Add, the page will be sent to the server using the HTTP POST method. When the page is submitted, the if(IsPost) test evaluates to true and the conditional code runs, displaying the result of adding the numbers.
     
3. Save the page and run it in a browser. (Make sure the page is selected in the Files workspace before you run it.) Enter two whole numbers and then click the Add button.
   

---

Basic Programming Concepts

As you saw in lesson one of this series and in the previous example, even if you’ve never programmed before, with WebMatrix, ASP.NET web pages, and the Razor syntax, you can quickly create dynamic web pages with sophisticated features, and it won’t take much code to get things done.
This tutorial provides you with an overview of ASP.NET web programming. It isn’t an exhaustive examination, just a quick tour through the programming concepts you’ll use most often. Even so, it covers almost everything you’ll need for the rest of the session.
But first, a little technical background.

---

The Razor Syntax, Server Code, and ASP.NET

Razor syntax is a simple programming syntax for embedding server-based code in a web page.

Razor syntax is a simple programming syntax for embedding server-based code in a web page. In a web page that uses the Razor syntax, there are two kinds of content: client content and server code. Client content is the stuff you’re used to in web pages: HTML markup (elements), style information such as CSS, client script such as JavaScript, and plain text.
Razor syntax lets you add server code to this client content. If there’s server code in the page, the server runs that code first, before it sends the page to the browser. By running on the server, the code can perform tasks that can be a lot more complex to do using client content alone, like accessing server-based databases. Most importantly, server code can dynamically create client content — it can generate HTML markup or other content on the fly and then send it to the browser along with any static HTML that the page might contain. From the browser’s perspective, client content that’s generated by your server code is no different than any other client content. As you’ve already seen, the server code that’s required is quite simple.
ASP.NET web pages that include the Razor syntax have a special file extension (.cshtml or .vbhtml). The server recognizes these extensions, runs the code that’s marked with Razor syntax, and then sends the page to the browser.

Where does ASP.NET fit in?

Razor syntax is based on a technology from Microsoft called ASP.NET, which in turn is based on the Microsoft .NET Framework. The.NET Framework is a big, comprehensive programming framework from Microsoft for developing virtually any type of computer application. ASP.NET is the part of the .NET Framework that’s specifically designed for creating web applications. Developers have used ASP.NET to create many of the largest and highest-traffic websites in the world. (Any time you see the file-name extension .aspx as part of the URL in a site, you’ll know that the site was written using ASP.NET.)
The Razor syntax gives you all the power of ASP.NET, but using a simplified syntax that’s easier to learn if you’re a beginner and that makes you more productive if you’re an expert. Even though this syntax is simple to use, its family relationship to ASP.NET and the .NET Framework means that as your websites become more sophisticated, you have the power of the larger frameworks available to you.

---

Classes and Instances

ASP.NET server code uses objects, which are in turn built on the idea of classes. The class is the definition or template for an object. For example, an application might contain a Customer class that defines the properties and methods that any customer object needs.
When the application needs to work with actual customer information, it creates an instance of (or instantiates) a customer object. Each individual customer is a separate instance of the Customer class. Every instance supports the same properties and methods, but the property values for each instance are typically different, because each customer object is unique. In one customer object, the LastName property might be “Smith”; in another customer object, the LastName property might be “Jones.”
Similarly, any individual web page in your site is a Page object that’s an instance of the Page class. A button on the page is a Button object that is an instance of the Button class, and so on. Each instance has its own characteristics, but they all are based on what’s specified in the object’s class definition.

---

Language and Syntax

Earlier you saw a basic example of how to create an ASP.NET Web Pages page, and how you can add server code to HTML markup. Here you’ll learn the basics of writing ASP.NET server code using the Razor syntax — that is, the programming language rules.
If you’re experienced with programming (especially if you’ve used C, C++, C#, Visual Basic, or JavaScript), much of what you read here will be familiar. You’ll probably need to familiarize yourself only with how server code is added to markup in .cshtml files.

---

Basic Syntax

Combining Text, Markup, and Code in Code Blocks

In server code blocks, you’ll often want to output text or markup (or both) to the page. If a server code block contains text that’s not code and that instead should be rendered as is, ASP.NET needs to be able to distinguish that text from code. There are several ways to do this.

Enclose the text in an HTML element like p/p or em/em.

@if(IsPost) {
    // This line has all content between matched

 tags.

Hello, the time is @DateTime.Now and this page is a postback!

} else {
    // All content between matched tags, followed by server code.

Hello stranger, today is:  

  @DateTime.Now
}

The HTML element can include text, additional HTML elements, and server-code expressions. When ASP.NET sees the opening HTML tag, it renders everything including the element and its content as is to the browser (and resolves the server-code expressions).

Use the @: operator or the text element. The @: outputs a single line of content containing plain text or unmatched HTML tags; the text element encloses multiple lines to output. These options are useful when you don’t want to render an HTML element as part of the output.

@if(IsPost) {
     // Plain text followed by an unmatched HTML tag and server code.
     @: The time is:  @DateTime.Now
     // Server code and then plain text, matched tags, and more text.
     @DateTime.Now @:is the current time.
 }
 

If you want to output multiple lines of text or unmatched HTML tags, you can precede each line with @:, or you can enclose the line in a text element. Like the @: operator, text tags are used by ASP.NET to identify text content and are never rendered in the page output.

@if(IsPost) {
     // Repeat the previous example, but use  tags.

     The time is:  @DateTime.Now
     @DateTime.Now is the current time.

 }

 @{
     var minTemp = 75;
     It is the month of @DateTime.Now.ToString("MMMM"), and
     it's a great day! 

You can go swimming if it's at
     least @minTemp degrees. 

 }
 

The first example repeats the previous example but uses a single pair of text tags to enclose the text to render. In the second example, the text and /text tags enclose three lines, all of which have some uncontained text and unmatched HTML tags (br /), along with server code and matched HTML tags. Again, you could also precede each line individually with the @: operator; either way works.

Note:  When you output text as shown in this section — using an HTML element, the @: operator, or the text element — ASP.NET doesn’t HTML-encode the output. (As noted earlier, ASP.NET does encode the output of server code expressions and server code blocks that are preceded by @, except in the special cases noted in this section.)

Whitespace

Extra spaces in a statement (and outside of a string literal) don’t affect the statement:

@{ var lastName =    "Smith"; }

A line break in a statement has no effect on the statement, and you can wrap statements for readability. The following statements are the same:

@{ var theName =
"Smith"; }

@{
    var
    personName
    =
    "Smith"
    ;
}

However, you can’t wrap a line in the middle of a string literal. The following example doesn’t  work:

@{ var test = "This is a long
    string"; }  // Does not work!

To combine a long string that wraps to multiple lines like the above code, there are two options. You can use the concatenation operator (+), which you’ll see later in this tutorial. You can also use the @ character to create a verbatim string literal, as you saw earlier in this tutorial. You can break verbatim string literals across lines:

@{ var longString = @"This is a
    long
    string";
}

Code (and Markup) Comments

Comments let you leave notes for yourself or others. They also allow you to disable (“comment out”) a section of code or markup that you don’t want to run but want to keep in your page for the time being.
There’s different commenting syntax for Razor code and for HTML markup. As with all Razor code, Razor comments are processed (and then removed) on the server before the page is sent to the browser. Therefore, the Razor commenting syntax lets you put comments into the code (or even into the markup) that you can see when you edit the file, but that users don’t see, even in the page source.
For ASP.NET Razor comments, you start the comment with @* and end it with *@. The comment can be on one line or multiple lines:

@*  A one-line code comment. *@

@*
    This is a multiline code comment.
    It can continue for any number of lines.
*@

Here is a comment within a code block:

@{
    @* This is a comment. *@
    var theVar = 17;
}

Here is the same block of code, with the line of code commented out so that it won’t run:

@{
    @* This is a comment. *@
    @* var theVar = 17;  *@
}

Inside a code block, as an alternative to using Razor comment syntax, you can use the commenting syntax of the programming language you’re using, such as C#:

@{
    // This is a comment.
    var myVar = 17;
    /* This is a multi-line comment
    that uses C# commenting syntax. */
}

In C#, single-line comments are preceded by the // characters, and multi-line comments begin with /* and end with */. (As with Razor comments, C# comments are not rendered to the browser.)
For markup, as you probably know, you can create an HTML comment:

!-- This is a comment.  --

HTML comments start with !-- characters and end with --. You can use HTML comments to surround not only text, but also any HTML markup that you may want to keep in the page but don’t want to render. This HTML comment will hide the entire content of the tags and the text they contain:

!-- pThis is my paragraph./p  --

Unlike Razor comments, HTML comments are rendered to the page and the user can see them by viewing the page source.

---

Variables

A variable is a named object that you use to store data. You can name variables anything, but the name must begin with an alphabetic character and it cannot contain whitespace or reserved characters.

Variables and Data Types

A variable can have a specific data type, which indicates what kind of data is stored in the variable. You can have string variables that store string values (like “Hello world”), integer variables that store whole-number values (like 3 or 79), and date variables that store date values in a variety of formats (like 4/12/2010 or March 2009). And there are many other data types you can use.
However, you generally don’t have to specify a type for a variable. Most of the time, ASP.NET can figure out the type based on how the data in the variable is being used. (Occasionally you must specify a type; you’ll see examples in this session where this is true.)
You declare a variable using the var keyword (if you don’t want to specify a type) or by using the name of the type:

@{
    // Assigning a string to a variable.
    var greeting = "Welcome!";

    // Assigning a number to a variable.
    var theCount = 3;

    // Assigning an expression to a variable.
    var monthlyTotal = theCount + 5;

    // Assigning a date value to a variable.
    var today = DateTime.Today;

    // Assigning the current page's URL to a variable.
    var myPath = this.Request.Url;

    // Declaring variables using explicit data types.
    string name = "Joe";
    int count = 5;
    DateTime tomorrow = DateTime.Now.AddDays(1);

The following example shows some typical uses of variables in a web page:

@{
    // Embedding the value of a variable into HTML markup.
    p@greeting, friends!/p

    // Using variables as part of an inline expression.
    pThe predicted annual total is: @( monthlyTotal * 12)/p

    // Displaying the page URL with a variable.
    pThe URL to this page is: @myPath/p
}

The result displayed in a browser:

Converting and Testing Data Types

Although ASP.NET can usually determine a data type automatically, sometimes it can’t. Therefore, you might need to help ASP.NET out by performing an explicit conversion. Even if you don’t have to convert types, sometimes it’s helpful to test to see what type of data you might be working with.
The most common case is that you have to convert a string to another type, such as to an integer or date. The following example shows a typical case where you must convert a string to a number.

@{
    var total = 0;

    if(IsPost) {
        // Retrieve the numbers that the user entered.
        var num1 = Request["text1"];
        var num2 = Request["text2"];
        // Convert the entered strings into integers numbers and add.
        total = num1.AsInt() + num2.AsInt();
    }
}

As a rule, user input comes to you as strings. Even if you’ve prompted users to enter a number, and even if they’ve entered a digit, when user input is submitted and you read it in code, the data is in string format. Therefore, you must convert the string to a number. In the example, if you try to perform arithmetic on the values without converting them, the following error results, because ASP.NET cannot add two strings:
Cannot implicitly convert type ‘string’ to ‘int’.
To convert the values to integers, you call the AsInt method. If the conversion is successful, you can then add the numbers.
The following table lists some common conversion and test methods for variables.

---

Operators

An operator is a keyword or character that tells ASP.NET what kind of command to perform in an expression. The C# language (and the Razor syntax that’s based on it) supports many operators, but you only need to recognize a few to get started. The following table summarizes the most common operators.

Operator

Description

Examples

+
-
*
/
Math operators used in numerical expressions.

@(5 + 13)
 @{ var netWorth = 150000; }
 @{ var newTotal = netWorth * 2; }
 @(newTotal / 2)

=
Assignment. Assigns the value on the right side of a statement to the object on the left side.

var age = 17;

==
Equality. Returns true if the values are equal. (Notice the distinction between the = operator and the == operator.)

var myNum = 15;
 if (myNum == 15) { // Do something. } 

!=
Inequality. Returns true if the values are not equal.

var theNum = 13;
 if (theNum != 15) { // Do something. }

=
=
Less-than,
greater-than,
less-than-or-equal, and
greater-than-or-equal.

if (2  3) { // Do something. }
 var currentCount = 12;
 if(currentCount = 12) { // Do something. }

+
Concatenation, which is used to join strings. ASP.NET knows the difference between this operator and the addition operator based on the data type of the expression.

// The displayed result is "abcdef".
 @("abc" + "def")

+=
-=
The increment and decrement operators, which add and subtract 1 (respectively) from a variable.

int theCount = 0;
 theCount += 1; // Adds 1 to count

.
Dot. Used to distinguish objects and their properties and methods.

var myUrl = Request.Url;
 var count = Request["Count"].AsInt();

()
Parentheses. Used to group expressions and to pass parameters to methods.

@(3 + 7)
 @Request.MapPath(Request.FilePath);

[]
Brackets. Used for accessing values in arrays or collections.

var income = Request["AnnualIncome"];

!
Not. Reverses a true value to false and vice versa. Typically used as a shorthand way to test for false (that is, for not true).

bool taskCompleted = false;
 // Processing.
 if(!taskCompleted) {
  // Continue processing
}

||
Logical AND and OR, which are used to link conditions together.

bool myTaskCompleted = false;
 int totalCount = 0;
 // Processing.
 if(!myTaskCompleted  totalCount  12) {
   // Continue processing.
}

---

Working with File and Folder Paths in Code

You’ll often work with file and folder paths in your code. Here is an example of physical folder structure for a website as it might appear on your development computer:
C:WebSitesMyWebSite
    default.cshtml
    datafile.txt
    images
        Logo.jpg
    styles
        Styles.css
 Here are some essential details about URLs and paths:

• A URL begins with either a domain name (http://www.example.com) or a server name (http://localhost, http://mycomputer).
• A URL corresponds to a physical path on a host computer. For example, http://myserver might correspond to the folder C:websitesmywebsite on the server.
• A virtual path is shorthand to represent paths in code without having to specify the full path. It includes the portion of a URL that follows the domain or server name. When you use virtual paths, you can move your code to a different domain or server without having to update the paths.

Here’s an example to help you understand the differences:
The virtual root is /, just like the root of your C: drive is . (Virtual folder paths always use forward slashes.) The virtual path of a folder doesn’t have to have the same name as the physical folder; it can be an alias. (On production servers, the virtual path rarely matches an exact physical path.)
When you work with files and folders in code, sometimes you need to reference the physical path and sometimes a virtual path, depending on what objects you’re working with. ASP.NET gives you these tools for working with file and folder paths in code: the ~ operator, the Server.MapPath method, and the Href method.

The ~ operator: Getting the virtual root

In server code, to specify the virtual root path to folders or files, use the ~ operator. This is useful because you can move your website to a different folder or location without breaking the paths in your code.

@{
    var myImagesFolder = "~/images";
    var myStyleSheet = "~/styles/StyleSheet.css";
}

The Server.MapPath method: Converting virtual to physical paths

The Server.MapPath method converts a virtual path (like /default.cshtml) to an absolute physical path (like C:WebSitesMyWebSiteFolderdefault.cshtml). You use this method for tasks that require a complete physical path, like reading or writing a text file on the web server. (You typically don’t know the absolute physical path of your site on a hosting site’s server.) You pass the virtual path to a file or folder to the method, and it returns the physical path:

@{
    var dataFilePath = "~/dataFile.txt";
}
!-- Displays a physical path C:WebsitesMyWebSitedatafile.txt  --
p@Server.MapPath(dataFilePath)/p

The Href method: Creating paths to site resources

The Href method of the WebPage object converts paths that you create in server code (which can include the ~ operator) to paths that the browser understands. (The browser can’t understand the ~ operator, because that’s strictly an ASP.NET operator.) You use the Href method to create paths to resources like image files, other web pages, and CSS files. For example, you can use this method in HTML markup for attributes of img elements, link elements, and a elements.

@{
    var myImagesFolder = "~/images";
    var myStyleSheet = "~/styles/StyleSheet.css";
}

!-- This code creates the path "../images/Logo.jpg" in the src attribute. --
img src="@Href(myImagesFolder)/Logo.jpg" /

!-- This produces the same result, using a path with ~  --
img src="@Href("~/images")/Logo.jpg" /

!-- This creates a link to the CSS file. --
link rel="stylesheet" type="text/css" href="@Href(myStyleSheet)" /

---

Conditional Logic and Loops

ASP.NET server code lets you perform tasks based on conditions and write code that repeats statements a specific number of times (that is, code that runs a loop).

Testing Conditions

To test a simple condition you use the if statement, which returns true or false based on a test you specify:

@{
  var showToday = true;
  if(showToday)
  {
    @DateTime.Today;
  }
}

The if keyword starts a block. The actual test (condition) is in parentheses and returns true or false. The statements that run if the test is true are enclosed in braces. An if statement can include an else block that specifies statements to run if the condition is false:

@{
  var showToday = false;
  if(showToday)
  {
    @DateTime.Today;
  }
  else
  {
    textSorry!/text
  }
}

You can add multiple conditions using an else if block:

@{
    var theBalance = 4.99;
    if(theBalance == 0)
    {
        pYou have a zero balance./p
    }
    else if (theBalance   0  theBalance = 5)
    {
        pYour balance of $@theBalance is very low./p
    }
    else
    {
        pYour balance is: $@theBalance/p
    }
}

In this example, if the first condition in the if block is not true, the else if condition is checked. If that condition is met, the statements in the else if block are executed. If none of the conditions are met, the statements in the else block are executed. You can add any number of else if blocks, and then close with an else block as the “everything else” condition.
To test a large number of conditions, use a switch block:

@{
    var weekday = "Wednesday";
    var greeting = "";

    switch(weekday)
    {
        case "Monday":
            greeting = "Ok, it's a marvelous Monday";
            break;
        case "Tuesday":
            greeting = "It's a tremendous Tuesday";
            break;
        case "Wednesday":
            greeting = "Wild Wednesday is here!";
            break;
        default:
            greeting = "It's some other day, oh well.";
            break;
    }

    pSince it is @weekday, the message for today is: @greeting/p
}

The value to test is in parentheses (in the example, the weekday variable). Each individual test uses a case statement that ends with a colon (:). If the value of a case statement matches the test value, the code in that case block is executed. You close each case statement with a break statement. (If you forget to include break in each case block, the code from the next case statement will run also.) A switch block often has a default statement as the last case for an “everything else” option that runs if none of the other cases are true.
The result of the last two conditional blocks displayed in a browser:

Looping Code

You often need to run the same statements repeatedly. You do this by looping. For example, you often run the same statements for each item in a collection of data. If you know exactly how many times you want to loop, you can use a for loop. This kind of loop is especially useful for counting up or counting down:

@for(var i = 10; i  21; i++)
{
    pLine #: @i/p
}

The loop begins with the for keyword, followed by three statements in parentheses, each terminated with a semicolon.

• Inside the parentheses, the first statement (var i=10;) creates a counter and initializes it to 10. You don’t have to name the counter i — you can use any legal variable name. When the for loop runs, the counter is automatically incremented.
• The second statement (i  21;) sets the condition for how far you want to count. In this case, you want it to go to a maximum of 20 (that is, keep going while the counter is less than 21).
• The third statement (i++ ) uses an increment operator, which simply specifies that the counter should have 1 added to it each time the loop runs.

Inside the braces is the code that will run for each iteration of the loop. The markup creates a new paragraph (p element) each time and adds a line to the output,  displaying the value of i (the counter). When you run this page, the example creates 11 lines displaying the output, with the text in each line indicating the item number.

If you’re working with a collection or array, you often use a foreach loop. A collection is a group of similar objects, and the foreach loop lets you carry out a task on each item in the collection. This type of loop is convenient for collections, because unlike a for loop, you don’t have to increment the counter or set a limit. Instead, the foreach loop code simply proceeds through the collection until it’s finished.
This example returns the items in the Request.ServerVariables collection that (which is an object that contains information about your web server). It uses a foreach loop to display the name of each item by creating a new li element in an HTML bulleted list.

ul
@foreach (var myItem in Request.ServerVariables)
{
    li@myItem/li
}
/ul

The foreach keyword is followed by parentheses where you declare a variable that represents a single item in the collection (in the example, var item), followed by the in keyword, followed by the collection you want to loop through. In the body of the foreach loop, you can access the current item using the variable that you declared earlier.

To create a more general-purpose loop, use the while statement:

@{
    var countNum = 0;
    while (countNum  50)
    {
        countNum += 1;
        pLine #@countNum: /p
    }
}

A while loop begins with the while keyword, followed by parentheses where you specify how long the loop continues (here, for as long as countNum is less than 50), then the block to repeat. Loops typically increment (add to) or decrement (subtract from) a variable or object used for counting. In the example, the += operator adds 1 to countNum each time the loop runs. (To decrement a variable in a loop that counts down, you would use the decrement operator -=).

---

Objects and Collections

Nearly everything in an ASP.NET website is an object, including the web page itself. This section discusses some important objects you’ll work with frequently in your code.

Page Objects

The most basic object in ASP.NET is the page. You can access properties of the page object directly without any qualifying object. The following code gets the page’s file path, using the Request object of the page:

@{
    var path = Request.FilePath;
}

To make it clear that you’re referencing properties and methods on the current page object, you can optionally use the keyword this to represent the page object in your code. Here is the previous code example, with this added to represent the page:

@{
    var path = this.Request.FilePath;
}

You can use properties of the Page object to get a lot of information, such as:

• Request. As you’ve already seen, this is a collection of information about the current request, including what type of browser made the request, the URL of the page, the user identity, etc.
• Response. This is a collection of information about the response (page) that will be sent to the browser when the server code has finished running. For example, you can use this property to write information into the response.

  @{
      // Access the page's Request object to retrieve the Url.
      var pageUrl = this.Request.Url;
  }
  a href="@pageUrl"My page/a
  

Collection Objects (Arrays and Dictionaries)

A collection is a group of objects of the same type, such as a collection of Customer objects from a database. ASP.NET contains many built-in collections, like the Request.Files collection.
You’ll often work with data in collections. Two common collection types are the array and the dictionary. An array is useful when you want to store a collection of similar items but don’t want to create a separate variable to hold each item:

@* Array block 1: Declaring a new array using braces. *@
@{
    h3Team Members/h3
    string[] teamMembers = {"Matt", "Joanne", "Robert", "Nancy"};
    foreach (var person in teamMembers)
    {
        p@person/p
    }
}

With arrays, you declare a specific data type, such as string, int, or DateTime. To indicate that the variable can contain an array, you add brackets to the declaration (such as string[] or int[]). You can access items in an array using their position (index) or by using the foreach statement. Array indexes are zero-based — that is, the first item is at position 0, the second item is at position 1, and so on.

@{
    string[] teamMembers = {"Matt", "Joanne", "Robert", "Nancy"};
    pThe number of names in the teamMembers array: @teamMembers.Length /p
    pRobert is now in position: @Array.IndexOf(teamMembers, "Robert")/p
    pThe array item at position 2 (zero-based) is @teamMembers[2]/p
    h3Current order of team members in the list/h3
    foreach (var name in teamMembers)
    {
        p@name/p
    }
    h3Reversed order of team members in the list/h3
    Array.Reverse(teamMembers);
    foreach (var reversedItem in teamMembers)
    {
        p@reversedItem/p
    }
}

You can determine the number of items in an array by getting its Length property. To get the position of a specific item in the array (to search the array), use the Array.IndexOf method. You can also do things like reverse the contents of an array (the Array.Reverse method) or sort the contents (the Array.Sort method).
The output of the string array code displayed in a browser:

A dictionary is a collection of key/value pairs, where you provide the key (or name) to set or retrieve the corresponding value:

@{
    var myScores = new Dictionarystring, int();
    myScores.Add("test1", 71);
    myScores.Add("test2", 82);
    myScores.Add("test3", 100);
    myScores.Add("test4", 59);
}
pMy score on test 3 is: @myScores["test3"]%/p
@(myScores["test4"] = 79)
pMy corrected score on test 4 is: @myScores["test4"]%/p

To create a dictionary, you use the new keyword to indicate that you’re creating a new dictionary object. You can assign a dictionary to a variable using the var keyword. You indicate the data types of the items in the dictionary using angle brackets ( ). At the end of the declaration, you must add a pair of parentheses, because this is actually a method that creates a new dictionary.
To add items to the dictionary, you can call the Add method of the dictionary variable (myScores in this case), and then specify a key and a value. Alternatively, you can use square brackets to indicate the key and do a simple assignment, as in the following example:

myScores["test4"] = 79;

To get a value from the dictionary, you specify the key in brackets:

var testScoreThree = myScores["test3"];

---

Calling Methods with Parameters

As you read earlier in this tutorial, the objects that you program with can have methods. For example, a Database object might have a Database.Connect method. Many methods also have one or more parameters. A parameter is a value that you pass to a method to enable the method to complete its task. For example, look at a declaration for the Request.MapPath method, which takes three parameters:

public string MapPath(string virtualPath, string baseVirtualDir, bool allowCrossAppMapping);

This method returns the physical path on the server that corresponds to a specified virtual path. The three parameters for the method are virtualPath, baseVirtualDir, and allowCrossAppMapping. (Notice that in the declaration, the parameters are listed with the data types of the data that they’ll accept.) When you call this method, you must supply values for all three parameters.
The Razor syntax gives you two options for passing parameters to a method: positional parameters and named parameters. To call a method using positional parameters, you pass the parameters in a strict order that’s specified in the method declaration. (You would typically know this order by reading documentation for the method.) You must follow the order, and you can’t skip any of the parameters — if necessary, you pass an empty string ("") or null for a positional parameter that you don’t have a value for.
The following example assumes you have a folder named scripts on your website. The code calls the Request.MapPath method and passes values for the three parameters in the correct order. It then displays the resulting mapped path.

// Pass parameters to a method using positional parameters.
var myPathPositional = Request.MapPath("/scripts", "/", true);
p@myPathPositional/p

When a method has many parameters, you can keep your code more readable by using named parameters. To call a method using named parameters, you specify the parameter name followed by a colon (:), and then the value. The advantage of named parameters is that you can pass them in any order you want. (A disadvantage is that the method call is not as compact.)
The following example calls the same method as above, but uses named parameters to supply the values:

// Pass parameters to a method using named parameters.
var myPathNamed = Request.MapPath(baseVirtualDir: "/", allowCrossAppMapping: true, virtualPath: "/scripts");
p@myPathNamed/p

As you can see, the parameters are passed in a different order. However, if you run the previous example and this example, they’ll return the same value.

---

Handling Errors

Try-Catch Statements

You’ll often have statements in your code that might fail for reasons outside your control. For example:

• If your code tries to open, create, read, or write a file, all sorts of errors might occur. The file you want might not exist, it might be locked, the code might not have permissions, and so on.
• Similarly, if your code tries to update records in a database, there can be permissions issues, the connection to the database might be dropped, the data to save might be invalid, and so on.

In programming terms, these situations are called exceptions. If your code encounters an exception, it generates (throws) an error message that’s, at best, annoying to users:

In situations where your code might encounter exceptions, and in order to avoid error messages of this type, you can use try/catch statements. In the try statement, you run the code that you’re checking. In one or more catch statements, you can look for specific errors (specific types of exceptions) that might have occurred. You can include as many catch statements as you need to look for errors that you are anticipating.

Note   We recommend that you avoid using the Response.Redirect method in try/catch statements, because it can cause an exception in your page.

The following example shows a page that creates a text file on the first request and then displays a button that lets the user open the file. The example deliberately uses a bad file name so that it will cause an exception. The code includes catch statements for two possible exceptions: FileNotFoundException, which occurs if the file name is bad, and DirectoryNotFoundException, which occurs if ASP.NET can’t even find the folder. (You can uncomment a statement in the example in order to see how it runs when everything works properly.)
If your code didn’t handle the exception, you would see an error page like the previous screen shot. However, the try/catch section helps prevent the user from seeing these types of errors.

@{
    var dataFilePath = "~/dataFile.txt";
    var fileContents = "";
    var physicalPath = Server.MapPath(dataFilePath);
    var userMessage = "Hello world, the time is " + DateTime.Now;
    var userErrMsg = "";
    var errMsg = "";

    if(IsPost)
    {
        // When the user clicks the "Open File" button and posts
        // the page, try to open the created file for reading.
        try {
            // This code fails because of faulty path to the file.
            fileContents = File.ReadAllText(@"c:batafile.txt");

            // This code works. To eliminate error on page,
            // comment the above line of code and uncomment this one.
            //fileContents = File.ReadAllText(physicalPath);
        }
        catch (FileNotFoundException ex) {
            // You can use the exception object for debugging, logging, etc.
            errMsg = ex.Message;
            // Create a friendly error message for users.
            userErrMsg = "A file could not be opened, please contact "
                + "your system administrator.";
        }
        catch (DirectoryNotFoundException ex) {
            // Similar to previous exception.
            errMsg = ex.Message;
            userErrMsg = "A directory was not found, please contact "
                + "your system administrator.";
        }
    }
    else
    {
        // The first time the page is requested, create the text file.
        File.WriteAllText(physicalPath, userMessage);
    }
}

!DOCTYPE html
html lang="en"
    head
        meta charset="utf-8" /
        titleTry-Catch Statements/title
    /head
    body
    form method="POST" action=""
      input type="Submit" name="Submit" value="Open File"/
    /form

    p@fileContents/p
    p@userErrMsg/p

    /body
/html

---

Stay tuned for lesson three in this session!